Calibration oil

Diesel pump calibration oil

Test oil for diesel injection pump and injector test benches. The reference standard is GB/T 8029, the Chinese national standard for diesel injection pump calibration oil.

Two 18 L drums of diesel pump calibration oil on a white background, with Chinese 校泵油 labels
18 L drums. The labels in this photograph are in Chinese (校泵油 / Xiao Beng You), not an English HAMEIDA label.

Product facts

The following facts are taken from the current HAMEIDA catalog.

  • Product nameHAMEIDA Diesel Pump Calibration Oil
  • ApplicationCalibration / test oil for diesel injection pump and injector test benches
  • Reference standardGB/T 8029 (Chinese national standard for diesel injection pump calibration oil)
  • Composition basisWhite mineral oil + hydrotreated light distillate, with antioxidant, rust inhibitor and antifoam additives
  • Packaging18 L drum only (net 14.5 kg)
  • OriginMade in China — factory in Xingtai, Hebei

Packaging

18 L drum — the only pack size

Per the HAMEIDA catalog, this product is supplied in an 18 L drum only, with a net weight of 14.5 kg per drum.

The usual minimum order is 100 drums (18 L each).

A second stock photograph is shown here. Drum labels are in Chinese, not an English HAMEIDA label.

Stacked 18 L calibration oil drums with Chinese 校泵油 labels
Stacked 18 L drums in stock. Labels read 校泵油 / Xiao Beng You.

Specifications

Typical values — per HAMEIDA catalog

The figures below are copied from the current HAMEIDA catalog. The catalog states: “Typical values, not a specification.” They are not a certified batch analysis. Factory inspection reports in our files are unsigned and are not used as the source of these figures.

Property Typical value Source
Density at 20°C 0.82 g/cm³ HAMEIDA catalog
Kinematic viscosity at 40°C 2.70 mm²/s HAMEIDA catalog
Flash point (closed cup) 108°C HAMEIDA catalog
Distillation — initial boiling point 160°C HAMEIDA catalog
Distillation — 95% recovered 360°C HAMEIDA catalog
Distillation — final boiling point 375°C HAMEIDA catalog

Typical values, not a specification — per the HAMEIDA catalog. Replace or supplement this table only with a confirmed data sheet or a signed report.

Applications

Diesel injection pump and injector test benches

The catalog describes this product as a calibration / test oil for diesel injection pump and injector test benches.

Fuel injection pump test benches

Used as a test oil when setting and checking diesel injection pumps under controlled fluid conditions.

Injector test benches

Used on injector and nozzle testers that call for a dedicated calibration / test oil rather than pump diesel.

Workshop and laboratory use

Intended for calibration work on diesel injection equipment. If your bench procedure names a required fluid, include that in your enquiry.

Our warehouse

Ready stock and export packing

Photographs of 18 L drums on pallets, before and after stretch-wrapping.

Pallet of 18 L calibration oil drums, not stretch-wrapped, with Chinese labels
18 L drums on a pallet, before stretch-wrapping. Labels are in Chinese (校泵油), not an English HAMEIDA label.
Warehouse pallet of 18 L calibration oil drums
Warehouse pallet of 18 L drums, labels in Chinese.
Stretch-wrapped pallets; product labels not visible
Stretch-wrapped pallets prepared for shipment. Product labels are not visible in this photograph.
Stretch-wrapped pallet; product labels not visible
Export packing with stretch film. Product labels are not visible in this photograph.

Catalog download

The current HAMEIDA calibration oil catalog (text uses GB/T 8029) can be downloaded below.

Other documents

Further product documents may be provided on request. [Confirm which oil documents you can issue, such as an SDS or transport papers.] Unsigned factory inspection reports or certificates of conformity are not presented on this site as certified documents.

WhatsApp